Mini Locker Waterproof
£88.59 More Detail
2 Door Mini Locker Waterproof Ultrabox Plus
£184.22 More Detail
4 Door Waterproof Ultrabox Plus
£340.99 More Detail
3 Door Waterproof Ultrabox Plus
£328.35 More Detail
2 Door Waterproof Ultrabox Plus Locker
£307.26 More Detail
The Ultrabox PLUS is the full weather version of the Ultrabox range.
Full weather Duty Up to IP 55 (Compartments will withstand water ingress i.e. water jets) it incorporates the addition of waterproof door seals, waterproof lock gaskets and waterproof drain hole plugs which makes this locker water proof and suitable for the most challenging of environments and all weather conditions.
Full weather Duty Up to IP 55 (Compartments will withstand water ingress i.e. water jets)
Available in full height 1800mm high lockers with 2,3 or 4 compartments or as single minis at 450mm high or 2 compartment mini lockers at 900mm high.
Product made from MDPE (Medium High Density Polyethylene)
Carcass, Doors and Shelves.
The Material can work in severe climatic conditions from -29°C to 40°C
Revolve N-272 protects your lockers from bacteria and the problems associated with bacteria. The antibacterial additive used is inorganic, and is able to inhibit the growth of bacteria, mold and yeast. The functional additive works from the inside out and prevents microbial growth in micro-cracks, dead spots and rough surfaces. Revolve N-272 protection gives better performance than the organic version since it is effective also against MRSA.
Specimens molded from the plastic material are oriented in either a horizontal or vertical position depending on the specifications of the relevant test method, and they are subjected to a defined flame ignition source for a specified period of time. In some tests, the test flame is only applied once as is the case of the horizontal burning (HB) test, while in other tests the flame is applied at least twice. An HB flame rating indicates that the material was tested in a horizontal position and found to burn at a rate less than a specified maximum. The three vertical ratings, V2, V1 and V0 indicate that the material was tested in a vertical position and self-extinguished within a specified time after the ignition source was removed. The vertical ratings also indicate whether the test specimen dripped flaming particles that ignited a cotton indicator located below the sample. UL 94 also describes a method in which the test flame is applied for up to five applications in testing for a 5VA or 5VB classification. These small-scale tests measure the propensity of a material to extinguish or spread flames once it becomes ignited.
The Material used in the production of the UltraBox Locker is able to be fully recycled The plastic recyclables are then shredded. These shredded fragments then undergo processes to eliminate impurities like paper labels. This material is melted and often extruded into the form of pellets, which are then used to manufacture other products.
Ultra Violet Protection (UV)
By adding a UV stabilizer HALS (hindered amine light stabilizer UV15) PE material can last up to 15 years in Northern Europe, but this can be time may be less in very harsh environment ie. (Deserts, or the ocean Pacific). This means that after 12 years in the Northern regions, 50% of the original mechanical properties are left.
If no UV stabilizers are present then the product will become brittle over time and colours will fade.
Probe warrants to commercial and institutional purchasers only each new UltraBox locker unit purchased from us to be free from defects in materials and workmanship under normal use and service for a period of one year and be free from rust, delamination or breakage of any plastic components for a period of 10 years under normal use. This warranty is measured from the date of our invoices, upon the following terms and
This warranty is limited to replacing or repairing, at our option, transportation charges prepaid by the purchaser, any UltraBox locker unit or part therefore which our inspection shall show to have been defective within the limitations of this warranty.
This warranty does not cover installation labour charges and does not apply to any units that have been damaged by accident, abuse, improper installation, improper maintenance, or altered in any way.
Care of Product
All surfaces should be cleaned with a mild liquid soap only. The finish should then be wiped and dried. In areas containing showers, either self- contained or tiled-in units, the lockers in these rooms must receive ventilation from the outside so that humidity can escape.
Under no circumstance should the following agents be used:
Abrasive powder or scouring pads
Ceramic tile cleaners
Solutions containing more than 1% by volume of ammonia
Solutions containing acids or lye
Solutions containing enzymes
If the above instructions are adhered to our products provide years of dependable service. Probe Storage shall not accept responsibility for product failure if the above instructions are not followed.